Previous Up Next

Chapter 7  Language extensions

This chapter describes language extensions and convenience features that are implemented in OCaml, but not described in the OCaml reference manual.

7.1  Integer literals for types int32, int64 and nativeint

(Introduced in Objective Caml 3.07)

constant::= ...  
  int32-literal  
  int64-literal  
  nativeint-literal  
 
int32-literal::= integer-literal l  
 
int64-literal::= integer-literal L  
 
nativeint-literal::= integer-literal n

An integer literal can be followed by one of the letters l, L or n to indicate that this integer has type int32, int64 or nativeint respectively, instead of the default type int for integer literals. The library modules Int32[Int32], Int64[Int64] and Nativeint[Nativeint] provide operations on these integer types.

7.2  Streams and stream parsers

(Removed in Objective Caml 3.03)

The syntax for streams and stream parsers is no longer part of the OCaml language, but available through a Camlp4 syntax extension. See the Camlp4 reference manual for more information. Support for basic operations on streams is still available through the Stream[Stream] module of the standard library. OCaml programs that use the stream parser syntax should be compiled with the -pp camlp4o option to ocamlc and ocamlopt. For interactive use, run ocaml and issue the #load "dynlink.cma";; command, followed by the #load "camlp4o.cma";; command.

7.3  Recursive definitions of values

(Introduced in Objective Caml 1.00)

As mentioned in section 6.7.1, the let rec binding construct, in addition to the definition of recursive functions, also supports a certain class of recursive definitions of non-functional values, such as

let rec name1 = 1 ::  name2 and  name2 = 2 ::  name1 in  expr

which binds name1 to the cyclic list 1::2::1::2::…, and name2 to the cyclic list 2::1::2::1::…Informally, the class of accepted definitions consists of those definitions where the defined names occur only inside function bodies or as argument to a data constructor.

More precisely, consider the expression:

let rec name1 =  expr1 andand  namen =  exprn in  expr

It will be accepted if each one of expr1 …  exprn is statically constructive with respect to name1 …  namen, is not immediately linked to any of name1 …  namen, and is not an array constructor whose arguments have abstract type.

An expression e is said to be statically constructive with respect to the variables name1 …  namen if at least one of the following conditions is true:

An expression e is said to be immediately linked to the variable name in the following cases:

7.4  Range patterns

(Introduced in Objective Caml 1.00)

pattern::= ...  
  char-literal ..  char-literal

In patterns, OCaml recognizes the form ' c ' .. ' d ' as shorthand for the pattern

' c ' | ' c1 ' | ' c2 ' || ' cn ' | ' d '

where c1, c2, …, cn are the characters that occur between c and d in the ASCII character set. For instance, the pattern '0'..'9' matches all characters that are digits.

7.5  Assertion checking

(Introduced in Objective Caml 1.06)

expr::= ...  
  assert expr

OCaml supports the assert construct to check debugging assertions. The expression assert expr evaluates the expression expr and returns () if expr evaluates to true. If it evaluates to false the exception Assert_failure is raised with the source file name and the location of expr as arguments. Assertion checking can be turned off with the -noassert compiler option. In this case, expr is not evaluated at all.

As a special case, assert false is reduced to raise (Assert_failure ...), which gives it a polymorphic type. This means that it can be used in place of any expression (for example as a branch of any pattern-matching). It also means that the assert false “assertions” cannot be turned off by the -noassert option.

7.6  Lazy evaluation

7.6.1  Lazy expressions

(Introduced in Objective Caml 1.06)

expr::= ...  
  lazy expr

The expression lazy expr returns a value v of type Lazy.t that encapsulates the computation of expr. The argument expr is not evaluated at this point in the program. Instead, its evaluation will be performed the first time the function Lazy.force is applied to the value v, returning the actual value of expr. Subsequent applications of Lazy.force to v do not evaluate expr again. Applications of Lazy.force may be implicit through pattern matching (see below).

7.6.2  Lazy patterns

(Introduced in Objective Caml 3.11)

pattern::= ...  
  lazy pattern

The pattern lazy pattern matches a value v of type Lazy.t, provided pattern matches the result of forcing v with Lazy.force. A successful match of a pattern containing lazy sub-patterns forces the corresponding parts of the value being matched, even those that imply no test such as lazy value-name or lazy _. Matching a value with a pattern-matching where some patterns contain lazy sub-patterns may imply forcing parts of the value, even when the pattern selected in the end has no lazy sub-pattern.

For more information, see the description of module Lazy in the standard library ( Module Lazy).

7.7  Local modules

(Introduced in Objective Caml 2.00)

expr::= ...  
  let module module-name  { ( module-name :  module-type ) }  [ : module-type ]  =  module-expr in  expr

The expression let module module-name =  module-expr in  expr locally binds the module expression module-expr to the identifier module-name during the evaluation of the expression expr. It then returns the value of expr. For example:

        let remove_duplicates comparison_fun string_list =
          let module StringSet =
            Set.Make(struct type t = string
                            let compare = comparison_fun end) in
          StringSet.elements
            (List.fold_right StringSet.add string_list StringSet.empty)

7.8  Recursive modules

(Introduced in Objective Caml 3.07)

definition::= ...  
  module rec module-name :  module-type =  module-expr   { and module-name :  module-type =  module-expr }  
 
specification::= ...  
  module rec module-name :  module-type  { and module-name:  module-type }

Recursive module definitions, introduced by the module recand … construction, generalize regular module definitions module module-name =  module-expr and module specifications module module-name :  module-type by allowing the defining module-expr and the module-type to refer recursively to the module identifiers being defined. A typical example of a recursive module definition is:

    module rec A : sig
                     type t = Leaf of string | Node of ASet.t
                     val compare: t -> t -> int
                   end
                 = struct
                     type t = Leaf of string | Node of ASet.t
                     let compare t1 t2 =
                       match (t1, t2) with
                         (Leaf s1, Leaf s2) -> Pervasives.compare s1 s2
                       | (Leaf _, Node _) -> 1
                       | (Node _, Leaf _) -> -1
                       | (Node n1, Node n2) -> ASet.compare n1 n2
                   end
        and ASet : Set.S with type elt = A.t
                 = Set.Make(A)

It can be given the following specification:

    module rec A : sig
                     type t = Leaf of string | Node of ASet.t
                     val compare: t -> t -> int
                   end
        and ASet : Set.S with type elt = A.t

This is an experimental extension of OCaml: the class of recursive definitions accepted, as well as its dynamic semantics are not final and subject to change in future releases.

Currently, the compiler requires that all dependency cycles between the recursively-defined module identifiers go through at least one “safe” module. A module is “safe” if all value definitions that it contains have function types typexpr1 ->  typexpr2. Evaluation of a recursive module definition proceeds by building initial values for the safe modules involved, binding all (functional) values to fun _ -> raise Undefined_recursive_module. The defining module expressions are then evaluated, and the initial values for the safe modules are replaced by the values thus computed. If a function component of a safe module is applied during this computation (which corresponds to an ill-founded recursive definition), the Undefined_recursive_module exception is raised.

Note that, in the specification case, the module-types must be parenthesized if they use the with mod-constraint construct.

7.9  Private types

Private type declarations in module signatures, of the form type t = private ..., enable libraries to reveal some, but not all aspects of the implementation of a type to clients of the library. In this respect, they strike a middle ground between abstract type declarations, where no information is revealed on the type implementation, and data type definitions and type abbreviations, where all aspects of the type implementation are publicized. Private type declarations come in three flavors: for variant and record types (section 7.9.1), for type abbreviations (section 7.9.2), and for row types (section 7.9.3).

7.9.1  Private variant and record types

(Introduced in Objective Caml 3.07)

type-representation::= ...  
  = private [ | ] constr-decl  { | constr-decl }  
  = private { field-decl  { ; field-decl }  [ ; ] }

Values of a variant or record type declared private can be de-structured normally in pattern-matching or via the expr .  field notation for record accesses. However, values of these types cannot be constructed directly by constructor application or record construction. Moreover, assignment on a mutable field of a private record type is not allowed.

The typical use of private types is in the export signature of a module, to ensure that construction of values of the private type always go through the functions provided by the module, while still allowing pattern-matching outside the defining module. For example:

        module M : sig
                     type t = private A | B of int
                     val a : t
                     val b : int -> t
                   end
                 = struct
                     type t = A | B of int
                     let a = A
                     let b n = assert (n > 0); B n
                   end

Here, the private declaration ensures that in any value of type M.t, the argument to the B constructor is always a positive integer.

With respect to the variance of their parameters, private types are handled like abstract types. That is, if a private type has parameters, their variance is the one explicitly given by prefixing the parameter by a ‘+’ or a ‘-’, it is invariant otherwise.

7.9.2  Private type abbreviations

(Introduced in Objective Caml 3.11)

type-equation::= ...  
  = private typexpr

Unlike a regular type abbreviation, a private type abbreviation declares a type that is distinct from its implementation type typexpr. However, coercions from the type to typexpr are permitted. Moreover, the compiler “knows” the implementation type and can take advantage of this knowledge to perform type-directed optimizations. For ambiguity reasons, typexpr cannot be an object or polymorphic variant type, but a similar behaviour can be obtained through private row types.

The following example uses a private type abbreviation to define a module of nonnegative integers:

        module N : sig
                     type t = private int
                     val of_int: int -> t
                     val to_int: t -> int
                   end
                 = struct
                     type t = int
                     let of_int n = assert (n >= 0); n
                     let to_int n = n
                   end

The type N.t is incompatible with int, ensuring that nonnegative integers and regular integers are not confused. However, if x has type N.t, the coercion (x :> int) is legal and returns the underlying integer, just like N.to_int x. Deep coercions are also supported: if l has type N.t list, the coercion (l :> int list) returns the list of underlying integers, like List.map N.to_int l but without copying the list l.

Note that the coercion ( expr :>  typexpr ) is actually an abbreviated form, and will only work in presence of private abbreviations if neither the type of expr nor typexpr contain any type variables. If they do, you must use the full form ( expr :  typexpr1 :>  typexpr2 ) where typexpr1 is the expected type of expr. Concretely, this would be (x : N.t :> int) and (l : N.t list :> int list) for the above examples.

7.9.3  Private row types

(Introduced in Objective Caml 3.09)

type-equation::= ...  
  = private typexpr

Private row types are type abbreviations where part of the structure of the type is left abstract. Concretely typexpr in the above should denote either an object type or a polymorphic variant type, with some possibility of refinement left. If the private declaration is used in an interface, the corresponding implementation may either provide a ground instance, or a refined private type.

   module M : sig type c = private < x : int; .. > val o : c end =
     struct
       class c = object method x = 3 method y = 2 end
       let o = new c
     end

This declaration does more than hiding the y method, it also makes the type c incompatible with any other closed object type, meaning that only o will be of type c. In that respect it behaves similarly to private record types. But private row types are more flexible with respect to incremental refinement. This feature can be used in combination with functors.

   module F(X : sig type c = private < x : int; .. > end) =
     struct
       let get_x (o : X.c) = o#x
     end
   module G(X : sig type c = private < x : int; y : int; .. > end) =
     struct
       include F(X)
       let get_y (o : X.c) = o#y
     end

Polymorphic variant types can be refined in two ways, either to allow the addition of new constructors, or to allow the disparition of declared constructors. The second case corresponds to private variant types (one cannot create a value of the private type), while the first case requires default cases in pattern-matching to handle addition.

   type t = [ `A of int | `B of bool ]
   type u = private [< t > `A ]
   type v = private [> t ]

With type u, it is possible to create values of the form (`A n), but not (`B b). With type v, construction is not restricted but pattern-matching must have a default case.

Similarly to abstract types, the variance of type parameters is not inferred, and must be given explicitly.

7.10  Local opens

(Introduced in OCaml 3.12)

expr::= ...  
  let open module-path in  expr  
  module-path .(  expr )

The expressions let open module-path in  expr and module-path.( expr) are strictly equivalent. They locally open the module referred to by the module path module-path in the scope of the expression expr.

Restricting opening to the scope of a single expression instead of a whole structure allows one to benefit from shorter syntax to refer to components of the opened module, without polluting the global scope. Also, this can make the code easier to read (the open statement is closer to where it is used) and to refactor (because the code fragment is more self-contained).

7.11  Record notations

(Introduced in OCaml 3.12)

pattern::= ...  
  { field  [= pattern]  { ; field  [= pattern] }  [; _ ] [;}  
 
expr::= ...  
  { field  [= expr]  { ; field  [= expr] }  [;}  
  { expr with  field  [= expr]  { ; field  [= expr] }  [;}

In a record pattern or a record construction expression, a single identifier id stands for id =  id, and a qualified identifier module-path .  id stands for module-path .  id =  id. For example, assuming the record type

          type point = { x: float; y: float }

has been declared, the following expressions are equivalent:

          let x = 1 and y = 2 in { x = x; y = y }
          let x = 1 and y = 2 in { x; y }
          let x = 1 and y = 2 in { x = x; y }

Likewise, the following functions are equivalent:

          fun {x = x; y = y} -> x + y
          fun {x; y} -> x + y

Optionally, a record pattern can be terminated by ; _ to convey the fact that not all fields of the record type are listed in the record pattern and that it is intentional. By default, the compiler ignores the ; _ annotation. If warning 9 is turned on, the compiler will warn when a record pattern fails to list all fields of the corresponding record type and is not terminated by ; _. Continuing the point example above,

          fun {x} -> x + 1

will warn if warning 9 is on, while

          fun {x; _} -> x + 1

will not warn. This warning can help spot program points where record patterns may need to be modified after new fields are added to a record type.

7.12  Explicit polymorphic type annotations

(Introduced in OCaml 3.12)

let-binding::= ...  
  value-name :  poly-typexpr =  expr

Polymorphic type annotations in let-definitions behave in a way similar to polymorphic methods: they explicitly require the defined value to be polymorphic, and allow one to use this polymorphism in recursive occurences (when using let rec). Note however that this is a normal polymorphic type, unifiable with any instance of itself.

There are two possible applications of this feature. One is polymorphic recursion:

        type 'a t = Leaf of 'a | Node of ('a * 'a) t
        let rec depth : 'a. 'a t -> 'b = function
            Leaf _ -> 1
          | Node x -> 1 + depth x

Note that 'b is not explicitly polymorphic here, and it will actually be unified with int.

The other application is to ensure that some definition is sufficiently polymorphic.

# let id : 'a. 'a -> 'a = fun x -> x+1 ;;
Error: This definition has type int -> int which is less general than
         'a. 'a -> 'a

7.13  Locally abstract types

(Introduced in OCaml 3.12)

parameter::= ...  
  ( type typeconstr-name )

The expression fun ( type typeconstr-name ) ->  expr introduces a type constructor named typeconstr-name which is considered abstract in the scope of the sub-expression, but then replaced by a fresh type variable. Note that contrary to what the syntax could suggest, the expression fun ( type typeconstr-name ) ->  expr itself does not suspend the evaluation of expr as a regular abstraction would. The syntax has been chosen to fit nicely in the context of function declarations, where it is generally used. It is possible to freely mix regular function parameters with pseudo type parameters, as in:

        let f = fun (type t) (foo : t list) -> ...

and even use the alternative syntax for declaring functions:

        let f (type t) (foo : t list) = ...

This construction is useful because the type constructor it introduces can be used in places where a type variable is not allowed. For instance, one can use it to define an exception in a local module within a polymorphic function.

        let f (type t) () =
          let module M = struct exception E of t end in
          (fun x -> M.E x), (function M.E x -> Some x | _ -> None)

Here is another example:

        let sort_uniq (type s) (cmp : s -> s -> int) =
          let module S = Set.Make(struct type t = s let compare = cmp end) in
          fun l ->
            S.elements (List.fold_right S.add l S.empty)

It is also extremely useful for first-class modules and GADTs.

Polymorphic syntax

(Introduced in OCaml 4.00)

let-binding::= ...  
  value-name : type  { typeconstr-name }+ .  typexpr =  expr  
 
class-field::= ...  
  method [privatemethod-name : type  { typeconstr-name }+ .  typexpr =  expr  
  method! [privatemethod-name : type  { typeconstr-name }+ .  typexpr =  expr

The (type typeconstr-name) syntax construction by itself does not make polymorphic the type variable it introduces, but it can be combined with explicit polymorphic annotations where needed. The above rule is provided as syntactic sugar to make this easier:

        let rec f : type t1 t2. t1 * t2 list -> t1 = ...

is automatically expanded into

        let rec f : 't1 't2. 't1 * 't2 list -> 't1 =
          fun (type t1) (type t2) -> (... : t1 * t2 list -> t1)

The same feature is provided for method definitions. The method! form combines this extension with the “explicit overriding” extension described in section 7.17.

7.14  First-class modules

(Introduced in OCaml 3.12; pattern syntax and package type inference introduced in 4.00)

typexpr::= ...  
  (module package-type)  
 
module-expr::= ...  
  (val expr  [: package-type])  
 
expr::= ...  
  (module module-expr  [: package-type])  
 
pattern::= ...  
  (module module-name  [: package-type])  
 
package-type::= modtype-path  
  modtype-path with  package-constraint  { and package-constraint }  
 
package-constraint::= type typeconstr =  typexpr

Modules are typically thought of as static components. This extension makes it possible to pack a module as a first-class value, which can later be dynamically unpacked into a module.

The expression ( module module-expr :  package-type ) converts the module (structure or functor) denoted by module expression module-expr to a value of the core language that encapsulates this module. The type of this core language value is ( module package-type ). The package-type annotation can be omitted if it can be inferred from the context.

Conversely, the module expression ( val expr :  package-type ) evaluates the core language expression expr to a value, which must have type module package-type, and extracts the module that was encapsulated in this value. Again package-type can be omitted if the type of expr is known.

The pattern ( module module-name :  package-type ) matches a package with type package-type and binds it to module-name. It is not allowed in toplevel let bindings. Again package-type can be omitted if it can be inferred from the enclosing pattern.

The package-type syntactic class appearing in the ( module package-type ) type expression and in the annotated forms represents a subset of module types. This subset consists of named module types with optional constraints of a limited form: only non-parametrized types can be specified. For type-checking purposes, package types are compared by path equality on the module type name component, and normal type equality for constraints.

The module expression ( val expr :  package-type ) cannot be used in the body of a functor, because this can cause unsoundness in conjunction with applicative functors. On the other hand, it can be used anywhere in the context of a local module binding let module module-name = ( val  expr1 :  package-type ) in  expr2.

Basic example

A typical use of first-class modules is to select at run-time among several implementations of a signature. Each implementation is a structure that we can encapsulate as a first-class module, then store in a data structure such as a hash table:

        module type DEVICE = sig ... end
        let devices : (string, (module DEVICE)) Hashtbl.t = Hashtbl.create 17

        module SVG = struct ... end
        let _ = Hashtbl.add devices "SVG" (module SVG : DEVICE)

        module PDF = struct ... end
        let _ = Hashtbl.add devices "PDF" (module PDF: DEVICE)

We can then select one implementation based on command-line arguments, for instance:

        module Device =
          (val (try Hashtbl.find devices (parse_cmdline())
                with Not_found -> eprintf "Unknown device %s\n"; exit 2)
           : DEVICE)

Alternatively, the selection can be performed within a function:

        let draw_using_device device_name picture =
          let module Device =
            (val (Hashtbl.find_devices device_name) : DEVICE)
          in
            Device.draw picture
Advanced examples

With first-class modules, it is possible to parametrize some code over the implementation of a module without using a functor.

        let sort (type s) (module Set : Set.S with type elt = s) l =
          Set.elements (List.fold_right Set.add l Set.empty)
        val sort : (module Set.S with type elt = 'a) -> 'a list -> 'a list

To use this function, one can wrap the Set.Make functor:

        let make_set (type s) cmp =
          let module S = Set.Make(struct
            type t = s
            let compare = cmp
          end) in
          (module S : Set.S with type elt = s)
        val make_set : ('a -> 'a -> int) -> (module Set.S with type elt = 'a)

7.15  Recovering the type of a module

(Introduced in OCaml 3.12)

module-type::= ...  
  module type of module-expr

The construction module type of module-expr expands to the module type (signature or functor type) inferred for the module expression module-expr.

A typical use, in conjunction with the signature-level include construct, is to extend the signature of an existing structure, as in the following example.

        module type MYHASH = sig
          include module type of Hashtbl
          val replace: ('a, 'b) t -> 'a -> 'b -> unit
        end

The signature MYHASH then contains all the fields of the signature of the module Hashtbl, plus the new field replace. An implementation of this signature can be obtained easily by using the include construct again, but this time at the structure level:

        module MyHash : MYHASH = struct
          include Hashtbl
          let replace t k v = remove t k; add t k v
        end

7.16  Substituting inside a signature

(Introduced in OCaml 3.12)

mod-constraint::= ...  
  type [type-params]  typeconstr-name :=  [type-params]  typeconstr-name typexpr  
  module module-name :=  extended-module-path

“Destructive” substitution (with ... := ...) behaves essentially like normal signature constraints (with ... = ...), but it additionally removes the redefined type or module from the signature. There are a number of restrictions: one can only remove types and modules at the outermost level (not inside submodules), and in the case of with type the definition must be another type constructor with the same type parameters.

A natural application of destructive substitution is merging two signatures sharing a type name.

        module type Printable = sig
          type t
          val print : Format.formatter -> t -> unit
        end
        module type Comparable = sig
          type t
          val compare : t -> t -> int
        end
        module type PrintableComparable = sig
          include Printable
          include Comparable with type t := t
        end

One can also use this to completely remove a field:

# module type S = Comparable with type t := int;;
module type S = sig val compare : int -> int -> int end

or to rename one:

# module type S = sig
    type u
    include Comparable with type t := u
  end;;
module type S = sig type u val compare : u -> u -> int end

Note that you can also remove manifest types, by substituting with the same type.

# module type ComparableInt = Comparable with type t = int ;;
module type ComparableInt = sig type t = int val compare : t -> t -> int end
# module type CompareInt = ComparableInt with type t := int ;;
module type CompareInt = sig val compare : int -> int -> int end

7.17  Explicit overriding in class definitions

(Introduced in OCaml 3.12)

class-field::= ...  
   inherit! class-expr  [as lowercase-ident]  
   val! [mutableinst-var-name  [: typexpr=  expr  
   method! [privatemethod-name  {parameter}  [: typexpr=  expr  
   method! [privatemethod-name :  poly-typexpr =  expr

The keywords inherit!, val! and method! have the same semantics as inherit, val and method, but they additionally require the definition they introduce to be an overriding. Namely, method! requires method-name to be already defined in this class, val! requires inst-var-name to be already defined in this class, and inherit! requires class-expr to override some definitions. If no such overriding occurs, an error is signaled.

As a side-effect, these 3 keywords avoid the warnings 7 (method override) and 13 (instance variable override). Note that warning 7 is disabled by default.

7.18  Overriding in open statements

(Introduced in OCaml 4.01)

definition::= ...  
   open! module-path  
 
specification::= ...  
   open! module-path  
 
expr::= ...  
  let open! module-path in  expr

Since OCaml 4.01, open statements shadowing an existing identifier (which is later used) trigger the warning 44. Adding a ! character after the open keyword indicates that such a shadowing is intentional and should not trigger the warning.

7.19  Generalized algebraic datatypes

(Introduced in OCaml 4.00)

constr-decl::= ...  
  constr-name :  [ typexpr  { * typexpr } -> ]  typexpr  
 
type-param::= ...  
  [variance_

Generalized algebraic datatypes, or GADTs, extend usual sum types in two ways: constraints on type parameters may change depending on the value constructor, and some type variables may be existentially quantified. Adding constraints is done by giving an explicit return type (the rightmost typexpr in the above syntax), where type parameters are instantiated. This return type must use the same type constructor as the type being defined, and have the same number of parameters. Variables are made existential when they appear inside a constructor’s argument, but not in its return type.

Since the use of a return type often eliminates the need to name type parameters in the left-hand side of a type definition, one can replace them with anonymous types _ in that case.

The constraints associated to each constructor can be recovered through pattern-matching. Namely, if the type of the scrutinee of a pattern-matching contains a locally abstract type, this type can be refined according to the constructor used. These extra constraints are only valid inside the corresponding branch of the pattern-matching. If a constructor has some existential variables, fresh locally abstract types are generated, and they must not escape the scope of this branch.

Here is a concrete example:

        type _ term =
          | Int : int -> int term
          | Add : (int -> int -> int) term
          | App : ('b -> 'a) term * 'b term -> 'a term

        let rec eval : type a. a term -> a = function
          | Int n    -> n                 (* a = int *)
          | Add      -> (fun x y -> x+y)  (* a = int -> int -> int *)
          | App(f,x) -> (eval f) (eval x)
                  (* eval called at types (b->a) and b for fresh b *)

        let two = eval (App (App (Add, Int 1), Int 1))
        val two : int = 2

Type inference for GADTs is notoriously hard. This is due to the fact some types may become ambiguous when escaping from a branch. For instance, in the Int case above, n could have either type int or a, and they are not equivalent outside of that branch. As a first approximation, type inference will always work if a pattern-matching is annotated with types containing no free type variables (both on the scrutinee and the return type). This is the case in the above example, thanks to the type annotation containing only locally abstract types.

In practice, type inference is a bit more clever than that: type annotations do not need to be immediately on the pattern-matching, and the types do not have to be always closed. As a result, it is usually enough to only annotate functions, as in the example above. Type annotations are propagated in two ways: for the scrutinee, they follow the flow of type inference, in a way similar to polymorphic methods; for the return type, they follow the structure of the program, they are split on functions, propagated to all branches of a pattern matching, and go through tuples, records, and sum types. Moreover, the notion of ambiguity used is stronger: a type is only seen as ambiguous if it was mixed with incompatible types (equated by constraints), without type annotations between them. For instance, the following program types correctly.

        let rec sum : type a. a term -> _ = fun x ->
          let y =
            match x with
            | Int n -> n
            | Add   -> 0
            | App(f,x) -> sum f + sum x
          in y + 1
        val sum : 'a term -> int = <fun>

Here the return type int is never mixed with a, so it is seen as non-ambiguous, and can be inferred. When using such partial type annotations we strongly suggest specifying the -principal mode, to check that inference is principal.

The exhaustiveness check is aware of GADT constraints, and can automatically infer that some cases cannot happen. For instance, the following pattern matching is correctly seen as exhaustive (the Add case cannot happen).

        let get_int : int term -> int = function
          | Int n    -> n
          | App(_,_) -> 0
Advanced examples

The term type we have defined above is an indexed type, where a type parameter reflects a property of the value contents. Another use of GADTs is singleton types, where a GADT value represents exactly one type. This value can be used as runtime representation for this type, and a function receiving it can have a polytypic behavior.

Here is an example of a polymorphic function that takes the runtime representation of some type t and a value of the same type, then pretty-prints the value as a string:

        type _ typ =
          | Int : int typ
          | String : string typ
          | Pair : 'a typ * 'b typ -> ('a * 'b) typ

        let rec to_string: type t. t typ -> t -> string =
          fun t x ->
          match t with
          | Int -> string_of_int x
          | String -> Printf.sprintf "%S" x
          | Pair(t1,t2) ->
              let (x1, x2) = x in
              Printf.sprintf "(%s,%s)" (to_string t1 x1) (to_string t2 x2)

Another frequent application of GADTs is equality witnesses.

        type (_,_) eq = Eq : ('a,'a) eq

        let cast : type a b. (a,b) eq -> a -> b = fun Eq x -> x

Here type eq has only one constructor, and by matching on it one adds a local constraint allowing the conversion between a and b. By building such equality witnesses, one can make equal types which are syntactically different.

Here is an example using both singleton types and equality witnesses to implement dynamic types.

        let rec eq_type : type a b. a typ -> b typ -> (a,b) eq option =
          fun a b ->
          match a, b with
          | Int, Int -> Some Eq
          | String, String -> Some Eq
          | Pair(a1,a2), Pair(b1,b2) ->
              begin match eq_type a1 b1, eq_type a2 b2 with
              | Some Eq, Some Eq -> Some Eq
              | _ -> None
              end
          | _ -> None

        type dyn = Dyn : 'a typ * 'a -> dyn

        let get_dyn : type a. a typ -> dyn -> a option =
          fun a (Dyn(b,x)) ->
          match eq_type a b with
          | None -> None
          | Some Eq -> Some x

7.20  Syntax for Bigarray access

(Introduced in Objective Caml 3.00)

expr::= ...  
  expr .{  expr  { , expr } }  
  expr .{  expr  { , expr } } <-  expr

This extension provides syntactic sugar for getting and setting elements in the arrays provided by the Bigarray[Bigarray] library.

The short expressions are translated into calls to functions of the Bigarray module as described in the following table.

expressiontranslation
expr0.{ expr1}Bigarray.Array1.get expr0  expr1
expr0.{ expr1} <- exprBigarray.Array1.set expr0  expr1  expr
expr0.{ expr1,  expr2}Bigarray.Array2.get expr0  expr1  expr2
expr0.{ expr1,  expr2} <- exprBigarray.Array2.set expr0  expr1  expr2  expr
expr0.{ expr1,  expr2,  expr3}Bigarray.Array3.get expr0  expr1  expr2  expr3
expr0.{ expr1,  expr2,  expr3} <- exprBigarray.Array3.set expr0  expr1  expr2  expr3  expr
expr0.{ expr1,,  exprn}Bigarray.Genarray.get expr0 [|  expr1,,  exprn |]
expr0.{ expr1,,  exprn} <- exprBigarray.Genarray.set expr0 [|  expr1,,  exprn |]  expr

The last two entries are valid for any n > 3.


Previous Up Next